1 Pc SAMPLE Sound Deadening Polyester Fabric Panel KK1093

Before you order 12 or 24, order 1.

Acoustic panels are a commitment — to a color, a texture, a material. The KK1093 sample exists so you don't have to guess. For $0.99 you get one full-size panel at the exact same specs as the full pack. Hold it. Feel the density. Stick it on your wall. See if the color works in your room.

If it's right, order the full pack with confidence. If it's not, you spent $0.99 to find out — not $69.99.

Request your color — don't leave it to chance

By default, color is assigned randomly from available stock. If you have a specific color in mind, add your preference in the order notes at checkout and we'll do our best to match it.

What you're getting

What to check when your sample arrives

You have 1 panel. Here's exactly what to test so you can make the full-pack decision with confidence:

• Color match. Hold it against your wall in the room's actual lighting — daylight, overhead, and lamp. Colors read differently in photos than in person.
• Texture feel. The fabric surface should feel dense and firm, not soft or flimsy. That density is what gives it acoustic performance.
• Size in the room. 30 × 30 cm is a specific footprint. Tape it to the wall (don't glue it yet) and step back — confirm the scale works for your layout before committing to a pattern.
• Adhesion test. Apply double-sided tape to the back corners and press it onto your wall for 24 hours. Then gently pull. This tells you how well it holds on your specific wall surface before you install 12 or 24.
• Acoustic spot-check. Clap your hands in the room, then clap again with the panel held up against the primary reflection point. Notice the difference — one panel won't transform the room, but you'll hear the absorption effect immediately.

Installation methods

This sample panel is not self-adhesive — the full KK1093 pack comes with self-adhesive backing, but the sample does not. Two methods work:

1. Double-sided tape (recommended for testing). Apply one piece of double-sided tape to each of the four corners of the panel back. Press firmly onto a clean, dry wall surface. This method is removable and ideal for the sample — you can reposition without damaging the wall.
2. PL Polyurethane Construction Adhesive (permanent). Apply adhesive in a perimeter line around the back of the panel and in an X pattern across the center. Press onto the wall and hold for 30 seconds. This is the permanent method — do not use on the sample unless you're certain of placement.

FAQ